|
The ChamberIR Model 4069 infrared heater is designed to provide heat for products in continuous processes or test specimens.
The Model 4069 heater focuses high-density infrared energy, generated by T-3 halogen lamps, inward toward a cylindrically shaped target area.
The clamshell-style’ heater design allows for easy access to the heating chamber.
The Model 4069 is offered in heated lengths of 10, 16, 25, and 38 inches (254, 406, 635, and 965 mm) and with either 12 or 18 lamp reflectors
depending on your product diameter.
|
Some typical applications for the heater are listed below:
- Curing Rubber/Silicone hose or tubing
- Drying and Curing Paint
- Re-glossing plastic tubing
- Curing coatings or adhesives on wire or cable
- Flocking
- Shrink insulation
- Coupon tests
- Spring stress test
- Vulcanizing
For detailed information select a link below:
ChamberIR Datasheet
ChamberIR User Manual